|
|
Are they safe?
The liquid light source is a non-toxic, non-corrosive, non-caustic,
lightweight, windproof, light source. It is not a source of heat or sparks
and is sealed within its own flexible plastic container. They are great
for use in areas which may contain combustible mixtures of gasses or liquids,
when ordinary sources of light might pose an explosion or fire hazard.
The manufacturer has tested the products according to the regulations
of the Federal Hazardous Substances Act and has determined that the products
are non-toxic, nor a corrosive or irritant. They can be safely handled
by children of all ages.
Are they waterproof?
Liquid glow products are waterproof and can be used in rain or damp
conditions, as well as underwater. They look really cool in your swimming
pool at night !!
How long do they glow?
Most products last anywhere from 4 to 12 hours, or longer after being
activated. This is based on the size and type of product.
What happens if the liquid leaks from the product?
If the product container is accidentally punctured the contents are non-toxic
and will not cause injury to the skin or eyes. Eye contact may cause temporary
discomfort similar to that produced by soaps or shampoos. Should an accident
occur, rinse the affected area thoroughly with clean water, repeating
several times.
Does temperature affect the product?
The chemical reaction in liquid glow products is influenced by temperature.
As temperature decreases, light intensity decreases, but duration of light
output increases. Liquid glow products are designed to produce their maximum
light emission for their intended duration when used at temperatures of
60°-80°F (15°-26°C). Lightsticks can be placed in a freezer to stop the
chemical reaction. The light emission will re-start as soon as the product
is taken out of the freezer and begins to warm up to room tempature.
What makes liquid glow products work?
Lightsticks and other glow items generate light when two chemical compounds
are mixed together in a process called chemiluminescense. This process
converts energy directly to light without heat, flame or spark. To keep
the reaction from occurring prematurely, the two compounds are kept separate
by storing one in a very thin capsule, which is broken by flexing or bending
the product tube. As long as you dont bend the tube, the chemical reaction
will not occur. When your ready to activate, just Bend and Shake and there
you go !!!
Remember what Left Eye Martinez always says "Sharing
is Caring"
|
